Lithium is not mined from brine so much as persuaded out of it. The brine itself is a salty groundwater pumped from beneath a salt flat, and the process of turning it into battery-grade lithium carbonate is a lesson in how much of industrial chemistry is really about patience and evaporation.

Where the brine comes from

Most brine lithium comes from the high-altitude salt flats of the Andes, in Chile, Argentina and Bolivia, plus a smaller number of sites in China and the United States. The brine sits in aquifers beneath the salt crust, and it is pumped to the surface through wells.

The concentration is low: a few hundred parts per million of lithium, compared with ore that can be several per cent. That is the fundamental difference between brine and hard rock, and it decides the entire process.

The evaporation step

Brine is pumped into a series of shallow ponds, and the sun does the work. Water evaporates over months, and the concentration of lithium rises as other salts precipitate out in sequence.

That sequence is the skill. Different salts crystallise at different concentrations, so the pond operator removes each one at the right moment, leaving a concentrate that is mostly lithium chloride. Get the timing wrong and you lose lithium with the wrong salt.

A full cycle takes twelve to twenty-four months, which is why brine projects cannot respond quickly to price spikes.

From concentrate to carbonate

The concentrated brine goes to a plant, where the remaining magnesium and boron are removed, and soda ash is added to precipitate lithium carbonate. That product is filtered, washed and dried.

Battery grade is the demanding part. Cells need very low levels of impurities, so the carbonate is refined further, and that refining is where much of the cost sits.

The water question

Brine extraction uses water in a region where water is scarce, and the argument about how much is contested. The operators say the brine is not potable and the process is mostly solar. The communities and researchers who study the basins point to aquifer drawdown and effects on wetlands.

That dispute is not settled, and any honest account of lithium has to say so.

The alternative: direct extraction

Direct lithium extraction, or DLE, uses sorbents or membranes to pull lithium out of brine without the ponds. It is faster, uses less land and can recover more of the lithium, and it is the technology most new projects are built around.

It is also less proven at scale, more energy intensive, and dependent on chemistry that varies from one brine to the next.

What it means for batteries

The cost of lithium is a small share of a battery's cost, which is why lithium prices can swing wildly without moving the price of a laptop much. What matters more for the finished product is cathode chemistry, which decides how much lithium is needed per kilowatt hour in the first place.

If you want the other end of that story, our explainer on what a neural processing unit does covers the other silicon that goes into the same devices.

FAQ

Is brine lithium worse than hard rock? It depends on the measure. It uses less energy and more water, and the land footprint is larger.

How long does the process take? Twelve to twenty-four months for conventional evaporation, days for direct extraction.

Can it be recycled instead? Recycling is growing but currently supplies a small share of demand.

The bottom line

Brine lithium is a solar-powered concentration process followed by ordinary chemical engineering, and its constraints are time, water and geology rather than technology. Direct extraction changes the time constraint and not the others.

Further reading: USGS lithium statistics and the IEA's critical minerals work.